https://www.ebay.co.uk/itm/WESTFIELD-11 ... SwXh9cWr~Q
BMW M10 engine....
Ebay W11
-
Splat
- Posts: 461
- Joined: Thu Jun 02, 2011 5:12 am
Re: Ebay W11
Interesting mechanical spec. Although he forgot to mention that the pedals were from an Austin J40 (and that’s a J, not an A)!!
-
alleggerita
- Posts: 122
- Joined: Thu Jun 30, 2011 6:06 pm
- Location: Uden, the Netherlands
- Contact:
Re: Ebay W11
It looks like one from the first series. Quite a surprise that a BMW engine fits underneath the bonnet without the need for any bulges.
-
Westfield 129
- Posts: 867
- Joined: Sat Jun 04, 2011 4:20 am
Re: Ebay W11
Quite a few changes...
Rear fuel tank, for one. The pedal quadrant seems to be similar to that in my LHD car.
Too bad that the bodywork was not removed for photos.
I too am wondering about how that 2000 Tilux engine fit under the front bodywork.
I see a lot of "re commissioning".
Rear fuel tank, for one. The pedal quadrant seems to be similar to that in my LHD car.
Too bad that the bodywork was not removed for photos.
I too am wondering about how that 2000 Tilux engine fit under the front bodywork.
I see a lot of "re commissioning".
-
jonclancy
- Posts: 944
- Joined: Tue Nov 01, 2011 9:30 pm
Re: Ebay W11
Unsold at 10K. What would you give for it?
-
biggles
- Posts: 317
- Joined: Tue Apr 10, 2012 8:10 am
Re: Ebay W11
Am I right in thinking that is the beemer block that can be turboed up to 1000+ bhp?!
Pricewise, 10k would be ok if it was all the right kit under the skin done nicely and the engine was free spinning and it wasn’t corroded from standing. Very much depends on how manky it is under there!!
Pricewise, 10k would be ok if it was all the right kit under the skin done nicely and the engine was free spinning and it wasn’t corroded from standing. Very much depends on how manky it is under there!!
-
jonclancy
- Posts: 944
- Joined: Tue Nov 01, 2011 9:30 pm
Re: Ebay W11
Yep, the M12, wasn’t it? I think the chassis mightneed a bit of bracing, though... 