Westfield Elevens

Well i thiught I was making headway, but.... filled the motor with oil and cranked over to check oil pressure and what do i find ? a hole in the sump pan

But we get a chance to look at the guts of the motor...

[attachment=0]crank view.jpg[/attachment]

sump repaired and refitted, also changed filter head to the spin-on type.

[attachment=1]sump repair.jpg[/attachment]

[attachment=1]sump repair.jpg[/attachment]

Look what the postman has delivered.....

[attachment=0]steering wheel.jpg[/attachment]

That's very nice. Is it a Jacob Engineering one?

Yes it is. I’m very pleased with it.

After the sump repair I refilled with oil and used the starter to see if the motor made oil pressure and this is the result... doesn't seems to bad.

[attachment=0]oil pressure.jpg[/attachment]

Are the switches in themselves as shown IVA compatible ?

I believe they are. The layout is straight from the factory and the switches will be covered by the steering wheel.

I did think that they might be shielded by the steering wheel , as this is the case things should be fine then .

My goodness the lightpods are ugly...

[attachment=0]lightpods.jpg[/attachment]