1275 A Series Engine Back Plate Clutch Cover Flywheel bolts
Posted: Fri Sep 05, 2014 8:46 pm
Hi Folks,
Seeing as this information is not readily available on the net in one place, I'll publish it here (so the next person won't have to dismantle a spare engine to check!).
Backplate (not including gearbox housing bolts)
5/16" x 7/8" UNF (7 no) with spring washer - torque around 20 lbf ft
Clutch cover
5/16" x 3/4" UNF (6 no) with spring washer - torque 20 lbf ft
Flywheel
3/8" x 7/8" (6 no) with single compound lock washer - torque 40 lbf ft
Sump bolts
1/4" x 1/2" (14 no) with spring and oval load-spreading flat washers - torque 6 lbf ft
Oil Pick Up pipe bracket bolts
1/4" x 3/8" (2 no) with star washer. Torque around 8 lbf ft
If anyone can list the gearbox mounting bolts, that'll be most helpful!!
Cheers
Jon
Text for the googlebot:
1275 A Series back plate clutch cover flywheel bolts bolt size UNF thread length engine spring washer
Seeing as this information is not readily available on the net in one place, I'll publish it here (so the next person won't have to dismantle a spare engine to check!).
Backplate (not including gearbox housing bolts)
5/16" x 7/8" UNF (7 no) with spring washer - torque around 20 lbf ft
Clutch cover
5/16" x 3/4" UNF (6 no) with spring washer - torque 20 lbf ft
Flywheel
3/8" x 7/8" (6 no) with single compound lock washer - torque 40 lbf ft
Sump bolts
1/4" x 1/2" (14 no) with spring and oval load-spreading flat washers - torque 6 lbf ft
Oil Pick Up pipe bracket bolts
1/4" x 3/8" (2 no) with star washer. Torque around 8 lbf ft
If anyone can list the gearbox mounting bolts, that'll be most helpful!!
Cheers
Jon
Text for the googlebot:
1275 A Series back plate clutch cover flywheel bolts bolt size UNF thread length engine spring washer